Contour HD Accessories - Mounts

A pack of 2 replacement adhesive bases for the Contour Rotating Flat Mount. These adhesive bases are designed for the newer (slightly larger) style rotating flat mount, however you can cut them down to suit the older style rotating flat mount.

Free shipping across Canada for orders over $99
In Stock

The Contour Rotating Flat Mount is the ultimate in smart design and simplicity. This useful multi-purpose surface mount was developed to be easy to use, and give you the confidence that once locked, it will stay in place. Simply slip the camera onto the TRails, rotate the camera into position, push on the lock button, and you are good to go.

Free shipping across Canada for orders over $99
In Stock

The Contour Goggle Strap Mount is great for sports where you don't wear a helmet or if you don't want to stick a mount on your shiny new helmet, although goggle mounting isn't as stable as helmet mounting. The Contour Goggle Mount will work with any Contour camera via the standard Contour Trail connection. The Contour Goggle Strap Mount comes with a short tether that you can use to make sure you don't loose your camera. More photos of the Contour Goggle Mount...

Free shipping across Canada for orders over $99
In Stock

The Contour Vented Helmet Mount allows you to mount your Contour camera to any helmet that has side by side vents such as a road cycling and cross country mountain bike helmets. The straps on the Contour Vented Helmet Mount pass through the vents and then back on themselves where they cinch down. The top of the Contour Vented Helmet Mount has a small amount of tilt adjustment so that you can dial in the right camera angle. More Contour Vented Helmet Mount photos...

Free shipping across Canada for orders over $99
In Stock

The Contour Bar Mount has a large diameter closure allowing you to mount it to bars from 15mm to 33mm in diameter. The Contour Bar Mount features the twist lock angle adjustment system that makes it easier to set up the right camera angle and the camera mounts via the standard Contour Trail mount system. More Photos...

Free shipping across Canada for orders over $99
In Stock

The Contour Windshield Suction Cup Mount can be used to attach any Contour camera to your windshield or other flat (non-porous) surfaces. This mount makes it simple to turn, tilt, and rotate your car camera 360⁰. The Contour Windshield Suction Cup Mount includes a mounting clip for the standard Contour T-Rail mounting system as well as a replacement 1/4" tripod connection that will screw in to the base of a Contour Roam camera or any other camera with a 1/4" tripod mount connection. More Contour windshield suction cup mount photos...

Free shipping across Canada for orders over $99
In Stock

The Contour HD Waterproof Housing fits the older model ContourHD and Contour HD 1080p cameras (does not fit the Contuour GPS, Roam or Plus cameras) like a hard plastic glove. Slide your ContourHD into the case, latch it down, and begin capturing your favorite water adventures. The waterproof case allows you to still use the power button and recording switch. It also has two safety latches on the back of the case to lock it onto any of the TRail mounts and a 1/4" female thread in the base to attach to a variety of mounts. Waterproof to 10 metres. More photos...

Free shipping across Canada for orders over $99
In Stock

The Contour GPS Waterproof Housing is specifically designed to fit the Contour GPS cameras (does not fit the Contour Roam or Contour+ cameras) like a hard plastic glove. Slide your ContourHD into the case, latch it down, and begin capturing your favorite water adventures. The waterproof case allows you to still use the power button and recording switch. It also has two safety latches on the back of the case to lock it onto any of the TRail mounts and a 1/4" female thread in the base to attach to a variety of mounts. Waterproof to 60 metres. More photos...

Free shipping across Canada for orders over $99
In Stock

The Contour Universal Mount will fit any of the Contour cameras. The Contour Universal Mount has a standard 1/4" female thread on the bottom so that you can use your camera with any mount with a tripod thread such as the XXL Roll Bar Mount and the Power Suction Cup Mount. It is also a good alternative helmet mount when used in conjunction with 3M Dual Lock. More Contour Universal Mount photos...

Free shipping across Canada for orders over $99
In Stock

Run out of mounting strips for your Nukeproof Mount or just looking for a more stable way to mount your helmet cam? Look no further, we now have 3M Dual Lock available by the meter. Dual Lock works like velcro but it is super tough and wont let go like Velcro does. The 3M Dual Lock is single sided (not dual sided as shown in the photo). To purchase multiple meters just change the quantity in your shopping cart. More photos...

Free shipping across Canada for orders over $99
In Stock

The Ultra Clamp is great for clamping the camera in odd spots including square edges and round bars like roll cages. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift cameras and Contour Roam) or that has a 1/4" tripod mount adaptor available (VIO, Contour cameras and GoPro cameras). The camera connects to a 1/4" thread that is easily adjustable in 3 axis.

Free shipping across Canada for orders over $99
In Stock

This 6" (15cm) long flexible steel rod can be used to get your helmet cam into all those weird spots you've been dreaming of. The Flex Mount has a standard 1/4" threaded male connector on one end and a 1/4" threaded female recepticle on the other end. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift Innovation, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

Free shipping across Canada for orders over $99
In Stock

This 12" (30cm) long flexible steel rod can be used to get your helmet cam into all those weird spots you've been dreaming of. The Flex Mount has a standard 1/4" threaded male connector on one end and a 1/4-20 threaded female recepticle on the other end. The 1/4" thread mount allows you to connect to any helmet camera that has a 1/4" female thread (Drift Innovation, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

Free shipping across Canada for orders over $99
In Stock

Finally, a super strong suction mount with a reliable camera mount! The suction cup mount has a lever for easy mounting and removal and will stick like glue to smooth, flat surfaces. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift Innovation, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro). The camera mount is fully adjustable so that you can get the perfect angle.

Free shipping across Canada for orders over $99
In Stock

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift Innovation, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

Free shipping across Canada for orders over $99
In Stock

This powerful suction cup mount can be used to attach your Drift Innovation HD170 action camera to your windshield or other flat (non-porous) surfaces. This mount makes it simple to turn, tilt, and rotate your car camera 360⁰.

Free shipping across Canada for orders over $99
In Stock

The Contour Profile Mount was built to place the Contour 1080 or the GPS camera within millimeters of the surface that you apply it to. The low profile design enhances the already minute size of the Contour video camera's making the World's Smallest HD Camera even more compact. Its 3M base adheres best to flat surfaces but will conform to curves of helmets and fairings for a variety of applications. This mount is designed to be used on the right hand side of your helmet.

Free shipping across Canada for orders over $99
In Stock

The Contour Profile Mount was built to place the Contour 1080 or the GPS camera within millimeters of the surface that you apply it to. The low profile design enhances the already minute size of the Contour video camera's making the World's Smallest HD Camera even more compact. Its 3M base adheres best to flat surfaces but will conform to curves of helmets and fairings for a variety of applications. This mount is designed to be used on the Left hand side of your helmet.

Free shipping across Canada for orders over $99
In Stock

The Drift Innovation Monopod is a compact, extendable "pole" that you can mount your helmet cam on. Perfect for getting shots pointing back at yourself or getting the camera closer to the people you are filming. The Monopod has a male 1/4" thread that will mount directly to Drift Innovation cameras and can be mounted to GoPro cameras with the GoPro Tripod Mount and Contour cameras with the Contour Universal Mount.

Free shipping across Canada for orders over $99
Out of Stock - discontinued

The Contour Headband Mount allows you to head mount your Contour camera without the use of a helmet. The elastic Contour headstrap mount has a one size fits all adjustable buckle which allows you to get the headband tight enough to minimize movement in the camera during use.

Free shipping across Canada for orders over $99
In Stock

The Contour Picatinny Mount allows you to mount your Contour camera to any tactical weapon with a standard MIL-STD-1913 Picatinny/Weaver rail. The Contour Picatinny Mount has a thumb screw on the bottom to ensure it doesn't come loose and is made from reinforced polymer to resist vibration, recoil forces and heat.

Free shipping across Canada for orders over $99
In Stock

The Contour Roll Bar Mount allows you to mount any Contour camera to bar 2" to 3" in diameter. The Contour Roll Bar Mount utilizes the popular RAM bar mount connection to mount to bars and the Contour Universal Mount connection for the camera.

FREE SHIPPING IN CANADA & USA INCLUDED ON ORDERS OVER $99
In Stock

The Contour+ Waterproof Housing is specifically designed to fit the Contour+ cameras (does not fit the Contour HD or Contour GPS cameras) like a hard plastic glove. Slide your Contour+ into the case, latch it down, and begin capturing your favorite water adventures. The waterproof case allows you to still use the power button and recording switch. It also has two safety latches on the back of the case to lock it onto any of the TRail mounts and a 1/4" female thread in the base to attach to a variety of mounts. Waterproof to 60 metres.

Free shipping across Canada for orders over $99
In Stock

The Camtrol Prime 22 is an ergonomic , handheld camera stabilizer designed to cradle and protect HDSLRs, camcorders, iPhones and all POV cameras. By mounting your camera on the Camtrol Prime 22 you can get steadier hand-held shots and manage your equipment a lot easier. By adding weight and width to the bottom of camera, the Camtrol results in a steadier and more stable shot. The Camtrol Prime 22 is highly adjustable without the use of tools. The Camtrol Prime 22 can also be used to create a 3D shooting rig with any helmet camera. More photos...

Free shipping across Canada for orders over $99
In Stock

The Drift GoPro Mount Adaptor allows you to mount a Drift camera to any GoPro mount including the adhesive based mounts and the chest harness mount. The Drift GoPro Mount Adaptor has a male 1/4" thread that screws in to the bottom of any Drift camera - the other end has the standard 2 x GoPro tabs that will connect to any GoPro mount. You can also use the Drift GoPro Mount Adaptor with any of the Contour cameras when used in conjunction with a Contour universal mount or a waterproof housing.

Free shipping across Canada for orders over $99
In Stock

The Contour Flex Strap mount allows you to mount your Contour on a wide variety of bars and tubes from 20mm to 70mm in diameter. The Contour Flex Strap mount is built around a modified rotating flat surface mount, allowing you to adjust the camera angle once it is mounted. The Contour Flex Strap mount comes with a short and long rubber mounting strap that is designed to absorb shock and vibrations.

Free shipping across Canada for orders over $99
In Stock

The Contour Chest Mount allows you to mount your Contour camera to your chest for a unique and immersive point of view. The Contour Chest mount is made up from three different mounts: the GoPro Chest Harness Mount which is highly adjustable to fit a wide variety of shapes and sizes; the Drift Mount Adaptor which allows you to connect to any GoPro mount via a 1/4" tripod thread; and the Contour Universal Mount which slides on to your Contour camera and has as a 1/4" female thread to connect to the Drift Mount Adaptor. For more info check out the Contour Chest Mount video.

Free shipping across Canada for orders over $99
out of Stock
On sale for $69. You save $9 (11%)!

The Contour Roam Waterproof Case is specifically designed to fit the Contour Roam camera (does not fit the Contour HD, GPS or Plus cameras) like a hard plastic glove. The Contour Roam waterproof gives you full camera functionality including the single-push recording and laser alignment. It is waterproof to 60 metres and will float if you happen to loose it in the water. The bottom of the Contour Roam waterproof case has a 1/4" female tripod mount connection and the standard TRail mounts on the side have locking switches to ensure the camera doesn't come off any mount you choose to use.

Free shipping across Canada for orders over $99
In Stock

The Contour 360 helmet mount is an extremely versatile mount that can be used to get a wide variety of shots including sideways and reverse angle recording. The 3M adhesive base is compact and flexible to suit curved surfaces. The easy to use lever on the bottom securely holds the camera to the base and makes it easy to remove the mount when not in use. The end of the mounting rail has a raised clip to lock the camera in place when in use. More Contour 360 helmet mount photos...

Free shipping across Canada for orders over $99
In Stock

The Contour 360 Helmet Mount Base is a replacement base with 3M adhesive for the Contour 360 helmet mount. The pack includes one replacement plastic base with adhesive as well as a spare adhesive piece.

Free shipping across Canada for orders over $99
In Stock

The Contour Surfboard Mount is a highly adjustable mount that can be used on a variety of boards as well as kayaks, boats and other watersports toys. The Contour Surfboard Mount has 360 degrees of rotation and 180 degrees of tilt and is specifically designed to work with all Contour waterproof housings. The quick release clip on the bottom of the mount allows you to remove the mount when it's not in use and the base comes with strong 3M adhesive to attach to your board. More Contour surfboard mount photos...

Free shipping across Canada for orders over $99
In Stock

The Contour Surfboard Mount Base is a replacement base for the Contour Surfboard Mount. The package includes one full surfboard mount base with 3M adhesive attached as well as a spare 3M adhesive piece.

Free shipping across Canada for orders over $99
In Stock

The Contour Hat Mount is designed to mount any Contour camera to the side of a flexible material hat or other piece of clothing. The Contour Hat Mount is a two piece construction, with a backing piece that sits inside the hat and a center disc that pushes on the outside of the hat and clips in to the backing piece. The Contour Hat Mount is a great way to head mount your Contour camera when you aren't using a helmet. More Contour hat mount photos...

Free shipping across Canada for orders over $99
In Stock

The Contour Pole Mount makes it easy to mount your Contour camera on a ski or hiking pole or any other small diameter pole. Use the Contour Pole Mount to get look back face shots while skiiing/snowboarding or to mount your Contour camera in other unique locations. The Contour Pole Mount will fit on to any pole that is between 11mm and 18mm in diameter. The base of the Contour Pole Mount attaches via two phillips head screws and the top section can be easily removed using the green clamp. More photos of the Contour Pole Mount...

Free shipping across Canada for orders over $99
In Stock