Oregon Scientific Accessories

The following accessories can be used with Oregon Scientific Helmet Camera systems.

Maxflash 4GB SD Card

max-flash-SD4GB.jpg

The MaxFlash 4GB SD card features a high read/write speed (Class 6) and is perfect for use in all helmet cameras that can record onto SDHC memory cards. Only compatible with the GoPro, VIO and Drift HD170 Stealth cameras.

Free shipping across Canada for orders over $99
In Stock

CA$9.00

Ultra Clamp

ultra-clamp.jpg

The Ultra Clamp is great for clamping the camera in odd spots including square edges and round bars like roll cages. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift cameras and Contour Roam) or that has a 1/4" tripod mount adaptor available (VIO, Contour cameras and GoPro cameras). The camera connects to a 1/4" thread that is easily adjustable in 3 axis.

Free shipping across Canada for orders over $99
In Stock

CA$32.00

Power Suction Cup Mount

suction cup mount.jpg

Finally, a super strong suction mount with a reliable camera mount! The suction cup mount has a lever for easy mounting and removal and will stick like glue to smooth, flat surfaces. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift Innovation, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro). The camera mount is fully adjustable so that you can get the perfect angle.

Free shipping across Canada for orders over $99
In Stock

CA$43.00

XXL Roll Bar Mount - 1/4" Thread

ORTXBM.jpg

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift Innovation, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

Free shipping across Canada for orders over $99
In Stock

CA$43.00

0915 Pelican SD Card Case

0920 case.jpg

The perfect way to store your SD memory cards. The 0915 Pelican Hard Case takes 8 x SD cards or 16 x Mini SD cards and is made from tough polycarbonate resin. The case has a water resistant seal to ensure your cards are protected. The case also comes with a customisable spare liner. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. Contact us for other sizes. Cards not included. More photos...

FREE SHIPPING IN CANADA & USA INCLUDED ON ORDERS OVER $99
In Stock

CA$24.00

Energizer 4xAA Rechargeable Batteries

energizer-4-AA.jpg

Save money by using rechargeable batteries in your helmet camera. The packet has 4 x AA Energizer 2300mAh rechargeable batteries.

Free shipping across Canada for orders over $99
In Stock

CA$17.00

Drift External Power Pack

drift-power-pack.jpg

The Drift External Power Pack is a really handy high capacity battery pack that you can use to charge a wide range of portable devices thanks to the included adaptors. The Drift External Power Pack has a massive 11000mAh capacity which will charge most brands of camera about 8 - 10 times. You charge the power pack using the included wall connection and then charge the device with one of the following adaptors: Micro-usb, Mini-usb, Samsung, iPad/iPhone/iPod, Sony-Ericsson and Nokia.

Free shipping across Canada for orders over $99
In Stock

CA$109.00

Camtrol Prime 22 camera stabilizing rig

camtrol.jpg

The Camtrol Prime 22 is an ergonomic , handheld camera stabilizer designed to cradle and protect HDSLRs, camcorders, iPhones and all POV cameras. By mounting your camera on the Camtrol Prime 22 you can get steadier hand-held shots and manage your equipment a lot easier. By adding weight and width to the bottom of camera, the Camtrol results in a steadier and more stable shot. The Camtrol Prime 22 is highly adjustable without the use of tools. The Camtrol Prime 22 can also be used to create a 3D shooting rig with any helmet camera. More photos...

Free shipping across Canada for orders over $99
In Stock

CA$399.00

Vault Case VC-07 hard case

vc7-black-open.jpg

The Vault Case VC-07 is a medium sized hard plastic case that is crushproof, dustproof and waterproof. The Vault Case VC-07 comes with "pick and pluck" foam inside the case that you can customize to fit whatever you want to put in the case. The interior dimensions of the Vault Case VC-07 are 7.50" x 5.00" x 3.00" (18.5cm x 12.5cm x 7.5cm) and the exterior dimensions are 8.25" x 6.50" x 3.5" (20.5cm x 16.5cm x 9cm). The default colour case that we ship is black however we do have yellow available as well. If you would like a yellow case please mention it in the order comments section at checkout. More Vault Case VC-07 photos...

Free shipping across Canada for orders over $99
In Stock

CA$32.00